It is currently 03 Jul 2025 23:48

All times are UTC+01:00




Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next
Author Message
 Post subject: xb swingarm section
PostPosted: 15 May 2011 18:00 
Offline
User avatar

Joined: 19 May 2009 20:42
Posts: 464
Location: my shed, Hampshire
hi, bought a swingarm for an xb but missing the small section that goes over the belt. not sure of correct name! any condition. cheers,muzz :sun:

_________________
BUELL-Turning riders into mechanics since 1983!!!


Top
 Post subject: Re: xb swingarm section
PostPosted: 20 May 2011 00:07 
Offline
Think Pink
User avatar

Joined: 07 Jun 2010 00:37
Posts: 3777
Current ride: Awesome Ulysses & X1
Location: balderton, newark
muzza wrote:
hi, bought a swingarm for an xb but missing the small section that goes over the belt. not sure of correct name! any condition. cheers,muzz :sun:

just tig weld some 19 mm by 12 mm on the top side of the swing arm ,dont need the brace then :yup: :sun:

_________________
IF IT BLEEDS WE CAN KILL IT ,THIS STUFF WILL MAKE YOU A GODDAM SEXUAL TYRANASURUS ,YOUVE BEEN PUSHING TOO MANY PENCILS DILLON .GET TO THE CHOPPER


Top
 Post subject: Re: xb swingarm section
PostPosted: 20 May 2011 05:58 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
And put a link in the belt?

_________________
08 Specialized Langster


Top
 Post subject: Re: xb swingarm section
PostPosted: 20 May 2011 07:41 
Offline

Joined: 07 May 2009 17:44
Posts: 605
Current ride: Xb12r
Location: Corby
pash wrote:
And put a link in the belt?

:hehe:


Top
 Post subject: Re: xb swingarm section
PostPosted: 20 May 2011 15:17 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
I've owned a few XB's in my time, and from memory there are two different types of brace depending on the model :?

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: xb swingarm section
PostPosted: 20 May 2011 23:05 
Offline
Think Pink
User avatar

Joined: 07 Jun 2010 00:37
Posts: 3777
Current ride: Awesome Ulysses & X1
Location: balderton, newark
pash wrote:
And put a link in the belt?

aint thought of doing that doc ,off to the shed NOOOOOOOOOW :yup: :rofl: :rofl:

_________________
IF IT BLEEDS WE CAN KILL IT ,THIS STUFF WILL MAKE YOU A GODDAM SEXUAL TYRANASURUS ,YOUVE BEEN PUSHING TOO MANY PENCILS DILLON .GET TO THE CHOPPER


Top
 Post subject: Re: xb swingarm section
PostPosted: 22 May 2011 22:01 
Offline
User avatar

Joined: 19 May 2009 20:42
Posts: 464
Location: my shed, Hampshire
how do i tell what section i need? is there a part number on the swingarm? these xb thingies are new to me :shock:

_________________
BUELL-Turning riders into mechanics since 1983!!!


Top
 Post subject: Re: xb swingarm section
PostPosted: 22 May 2011 22:18 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Post a picture...

Swing arms in 2003 to 2005 bikes were all the same (XB9s were silver XB12s were dark grey).
Swing arms in 2006 onwards came in two varieties, one for XB12X / XB12XT / XB12SS / XB12STT and one for XB12R / XB12S / XB9SX however the braces were the same for both varieties

The question is, is your swinger 2003 to 2005 or 2006 to 2010?

_________________
08 Specialized Langster


Top
 Post subject: Re: xb swingarm section
PostPosted: 24 May 2011 17:47 
Offline
User avatar

Joined: 19 May 2009 20:42
Posts: 464
Location: my shed, Hampshire
i would say its a '03 to '05 model. and its grey. :yup:

_________________
BUELL-Turning riders into mechanics since 1983!!!


Top
 Post subject: Re: xb swingarm section
PostPosted: 25 May 2011 13:55 
Offline
User avatar

Joined: 06 May 2009 22:35
Posts: 44
Current ride: T150v, Tracer, M20
Location: Midsomer Norton
Hi Muzza

If it's the alluminium casting you are after, how about this.

http://cgi.ebay.co.uk/BUELL-XB9R-2005-S ... 2eb563e40e

Item number: 200611718158

Part no: K0101.0248 Brace swingarm

If I misunderstood, sorry


Top
 Post subject: Re: xb swingarm section
PostPosted: 25 May 2011 21:51 
Offline
User avatar

Joined: 19 May 2009 20:42
Posts: 464
Location: my shed, Hampshire
thats the kiddie!!!!! will this fit guys? :?

_________________
BUELL-Turning riders into mechanics since 1983!!!


Top
 Post subject: Re: xb swingarm section
PostPosted: 25 May 2011 21:55 
Offline
User avatar

Joined: 05 May 2009 20:00
Posts: 11032
Current ride: X1 2001
Location: southampton
muzza wrote:
thats the kiddie!!!!! will this fit guys? :?


:shock: :shock: dunno , but it may fit the swinging arm :twisted:

_________________
Feros Ferio


Top
 Post subject: Re: xb swingarm section
PostPosted: 28 May 2011 20:10 
Offline
User avatar

Joined: 06 May 2009 17:54
Posts: 788
Location: Edinburgh
Yeah, I'm looking for a black one for an XB12STT, in good condition.
Scratched mine up dismantling the bike...


Top
 Post subject: Re: xb swingarm section
PostPosted: 31 May 2011 22:13 
Offline
User avatar

Joined: 19 May 2009 20:42
Posts: 464
Location: my shed, Hampshire
you wanna sell the scratched one ?

_________________
BUELL-Turning riders into mechanics since 1983!!!


Top
 Post subject: Re: xb swingarm section
PostPosted: 01 Jun 2011 17:57 
Offline
User avatar

Joined: 06 May 2009 17:54
Posts: 788
Location: Edinburgh
Yeah, but I'll need to get a replacement first


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited