| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| wanted Stock exhaust brackets for an x1 https://www.ukbeg.com/forum/viewtopic.php?f=11&t=10941 |
Page 1 of 2 |
| Author: | Babybadger [ 09 May 2011 00:04 ] |
| Post subject: | wanted Stock exhaust brackets for an x1 |
hi guys, got my stock x1 pipe off eBay, but it doesn't have brackets any going begging? Not sure if they need em, how many or where.... if someone has a pic of exactly what it looks like with brackets etc as it came off a bike, would be greatly appreciated.... ta in advance bb |
|
| Author: | chris(madrid) [ 09 May 2011 06:34 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
|
|
|
| Author: | pash [ 09 May 2011 09:34 ] | ||
| Post subject: | Re: wanted Stock exhaust brackets for an x1 | ||
I think this is it... This is the Australian version...
|
|||
| Author: | Babybadger [ 09 May 2011 09:53 ] |
| Post subject: | wanted Stock exhaust brackets for an x1 |
maz, have you any standard x1 exhaust brackets lying around please , pretty please... |
|
| Author: | Babybadger [ 10 May 2011 11:05 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
Babybadger wrote: maz, have you any standard x1 exhaust brackets lying around please , pretty please... Maz, If you can mate..... Can you have a look around for Part number S0116.K Mine may already have it on - http://www.supertrapp.com/images/pdfs/003-7235.pdf I am not sure what I have on mine, but it looks like I only need the rear hanger 'z' bracket ..... S0116.K I already have this one http://www.doncasto.net/hangernewtext.jpg according to the supertrapp bumpf.... Any help of course I will be grateful.... Matt |
|
| Author: | pash [ 10 May 2011 11:37 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
Do you have the rear support bracket in Fig 3? |
|
| Author: | Babybadger [ 10 May 2011 15:43 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
pash wrote: Do you have the rear support bracket in Fig 3? I have listed some photos to help of what is there and what I have.... sorry if one is blurred... Bike is in Tenerife and these are the only photos I have at the moment. http://www.flickr.com/photos/9108471@N08/sets/72157626690203678/ |
|
| Author: | Babybadger [ 10 May 2011 15:47 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
Yes I dont wash the bike often.... Its a working one... |
|
| Author: | Babybadger [ 10 May 2011 15:51 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
pash wrote: Do you have the rear support bracket in Fig 3? I would say no from the photos... |
|
| Author: | chris(madrid) [ 10 May 2011 16:19 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
Early Buells did not have the Z bracket at the rear - jut 2 simple steel strips with an 'ole at each end. I'll see if I can get to mine and measure them. They're somewhere behind a load of other junk. |
|
| Author: | Babybadger [ 10 May 2011 16:44 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
chris(madrid) wrote: Early Buells did not have the Z bracket at the rear - jut 2 simple steel strips with an 'ole at each end. I'll see if I can get to mine and measure them. They're somewhere behind a load of other junk. Cheers matey, mine is a 2001 model though. If you can take a picture would be grateful.... |
|
| Author: | chris(madrid) [ 11 May 2011 14:56 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
http://www.telefonica.net/web/vcs/IMAGESFORPOSTING/Zbracket%20(1).JPG http://www.telefonica.net/web/vcs/IMAGESFORPOSTING/Zbracket%20(2).JPG Strap holes are 2.175" CtC --- 8mm (5/16) 'oles. The metal is good and thick. |
|
| Author: | Babybadger [ 11 May 2011 16:57 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
chris(madrid) wrote: http://www.telefonica.net/web/vcs/IMAGESFORPOSTING/Zbracket%20(1).JPG http://www.telefonica.net/web/vcs/IMAGESFORPOSTING/Zbracket%20(2).JPG Strap holes are 2.175" CtC --- 8mm (5/16) 'oles. The metal is good and thick. That's the kiddy! Cheers mate... Cheaper than a new bracket from HD @ £35.40! Did your exhaust have a Caesarean section or something? |
|
| Author: | chris(madrid) [ 11 May 2011 21:15 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
Babybadger wrote: Did your exhaust have a Caesarean section or something? Yup - Tubbs gutted it. It' not as free as the V&H but it does breathe much better than stock and not much louder than stock. Just a slight hesitation just below 3000rpm. What I'd forgotten however is how the oem can dulls the flickability of the beastie. It must have something to do with a C of G change or something. Very odd and I'd rather stick with the V&H until I'm forced to change. |
|
| Author: | pash [ 11 May 2011 21:19 ] |
| Post subject: | Re: wanted Stock exhaust brackets for an x1 |
My bracket is currently winging its way to Tenerife to allow Mr Babybadger to MOT his bike this year. He is sending it me back when finished with, so he still needs one... |
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
.JPG){kind=link}
.JPG){kind=link}