albert666 wrote:
the dt swiss wheels i'd take £70 for inc postage
the hope seat clamp is 34.9mm
the shock is 215mm eye to eye
the discs are 6 bolt, front one is 204mm rear is 160mm
the bars are truvativ hussfelt 680mm wide, 40mm rise
up sweep 5 deg, back sweep 9 deg
31.8mm stem compatible
one stem is a truvativ holzfeller 31.8mm for a 1.5 inch steerer tube
60mm reach
the unbranded one is for normal size bars and steerer tube 55mm reach
the hope seat clamp is 34.9mm
the shock is 215mm eye to eye
the discs are 6 bolt, front one is 204mm rear is 160mm
the bars are truvativ hussfelt 680mm wide, 40mm rise
up sweep 5 deg, back sweep 9 deg
31.8mm stem compatible
one stem is a truvativ holzfeller 31.8mm for a 1.5 inch steerer tube
60mm reach
the unbranded one is for normal size bars and steerer tube 55mm reach
What bike was the Hope seat clamp on ( just to give me an idea!) it would either be going on a cotic steely or ab (old ) Orange Patriot. All, I think have 27.9 internal diameters ... need to go an buy a battery for callipers
Rear shock is 15 mm to long ... which is a shame !
Stem - 1.5 is for hard men with attitude !! I'm only a 1 1/8 man ...
So, I think I am out ....
What hubs are the DT Swiss on - an what condition??
