UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
2005 BUELL XB9SX for sale in bits, most of it missing https://www.ukbeg.com/forum/viewtopic.php?f=10&t=13152 |
Page 1 of 2 |
Author: | kuterba [ 17 Dec 2011 12:36 ] |
Post subject: | 2005 BUELL XB9SX for sale in bits, most of it missing |
Hi, My bike was suppose to be a project which turned bad for financial reasons and so I'm selling the whole BUELL XB9SX stripped down. It's a 2005 plate Buell with 14K miles. PM me with the part you are after and how much you are willing to pay and I will respond with a photo and other details. Everything available from working stator, frame, swing arm to piston flywheel, pistons, cases, headers, gears, cams, wheels (loads of thread on) etc etc. Everything is in a great shape I will push for you to inspect the part before buying and if you live far, then 100% money return if you're not happy/sth's wrong! I will update posts when sth is sold rather than list everything separately so if it's not posted, assume it's available. I have also a brand new, unopened cometic full rebuild gasket set - I will sell it for 100 quid. Also a new, unopened battery for a buell, 30 quid. If you make bigger purchases I will throw in Formula + tranny oil and Amsoil engine oil for freeeeee (starter motor is gone, oil lines are gone, indicators are gone, front exhaust bracket with strap is gone, rear pulley guards are gone) frame is on ebay at the moment: http://www.ebay.co.uk/itm/130618321130? ... 500wt_1287 some examples: http://www.buellxb.com/buell_images/115 ... 0331_L.jpg http://www.buellxb.com/buell_images/115 ... 0618_L.jpg http://www.buellxb.com/buell_images/115 ... 0830_L.jpg http://www.buellxb.com/buell_images/115 ... 0407_L.jpg http://www.buellxb.com/buell_images/115 ... 0513_L.jpg Let me know |
Author: | kuterba [ 17 Dec 2011 13:07 ] |
Post subject: | Re: whole 2005 BUELL XB9SX for sale in bits |
Front light with bracket and front fairing sold. some more photos: This is tail riser kit, a lambda sensor and a brand new oil pressure gauge. http://www.buellxb.com/buell_images/115 ... 0750_L.jpg Sprockets (stator sprocket with all magnets perfectly in line and not peeling off like they sometimes like to do on buells) http://www.buellxb.com/buell_images/115 ... 0708_L.jpg A bueatiful carbon fibre airbox cover imported from the us: http://www.buellxb.com/buell_images/115 ... 0541_L.jpg Air intake painted with high quality engine paint (up to 540C) and cured. Comes with all relevant screws, connections and calibrated. http://www.buellxb.com/buell_images/115 ... 3225_L.jpg |
Author: | pash [ 17 Dec 2011 22:44 ] |
Post subject: | Re: whole 2005 BUELL XB9SX for sale in bits |
How much for the whole bike? Would be nice to finish your project... |
Author: | kuterba [ 18 Dec 2011 06:10 ] |
Post subject: | Re: whole 2005 BUELL XB9SX for sale in bits |
Hi, I've sold too many parts now to sell the whole bike. The project was a nice idea but once I realised how much all the little bearings, seals and screws and bits and pieces will add to the initial cost I gave up. Still I have learned soooooo much about bikes and buell that whatever I invested in it already, was a tiny price to pay. ![]() |
Author: | pash [ 18 Dec 2011 06:42 ] |
Post subject: | Re: whole 2005 BUELL XB9SX for sale in bits |
How much do you want for everything that is left? |
Author: | kuterba [ 18 Dec 2011 12:23 ] |
Post subject: | Re: whole 2005 BUELL XB9SX for sale in bits |
Hi pash, I've pm-d you. take care |
Author: | Psycho [ 18 Dec 2011 17:04 ] |
Post subject: | Re: whole 2005 BUELL XB9SX for sale in bits |
Hi. Is the engine available, or have I rushed the question before thoroughly reading the post? Psycho. |
Author: | raven684 [ 18 Dec 2011 21:15 ] |
Post subject: | Re: whole 2005 BUELL XB9SX for sale in bits |
Ill take the tail raise kit.if you could let me know how much?thanks |
Author: | kuterba [ 19 Dec 2011 02:32 ] |
Post subject: | Re: whole 2005 BUELL XB9SX for sale in bits |
Tail kit is gone now, sorry. Engine wise, I have the cases and the gears + flywheel and pistons left. So not complete engine, sorry. pm me if you need specific items or details please |
Author: | kuterba [ 19 Dec 2011 13:57 ] |
Post subject: | Re: 2005 BUELL XB9SX for sale in bits, most of it missing |
Sorry about that guys, didn't expect such a barrage of messages ![]() Thanks for looking ! |
Author: | Digger [ 19 Dec 2011 14:13 ] |
Post subject: | Re: 2005 BUELL XB9SX for sale in bits, most of it missing |
What exactly DID you expect then? ![]() |
Author: | kuterba [ 19 Dec 2011 14:27 ] |
Post subject: | Re: 2005 BUELL XB9SX for sale in bits, most of it missing |
I suppose I'm glad to be disappointed ![]() |
Author: | kuterba [ 19 Dec 2011 17:19 ] |
Post subject: | Re: 2005 BUELL XB9SX for sale in bits, most of it missing |
Ok, so far this is what is left (I may add other items if the arrangements I have with people fall through): Engine cases with gears. http://www.buellxb.com/buell_images/115 ... 0407_L.jpg Flywheel (without the pinion gear) http://www.buellxb.com/buell_images/115 ... 0331_L.jpg Fuel pump http://www.buellxb.com/buell_images/115 ... 0445_L.jpg Carbon fibre airbox cover http://www.buellxb.com/buell_images/115 ... 0541_L.jpg Primary sprockets with chain http://www.buellxb.com/buell_images/115 ... 0708_L.jpg Rear pulley air/fuel intake manifold with all the bits (both left and right injectors) fuel line connector. airbox with K&N filter rear swingarm with new oil drain plug and great condition oil lines connection bits Front Yolks (top and bottom) Rear foot pegs Gear change and rear brake lever Foot control thing that attaches to the frame both left and right front break calliper front and rear break discs Oil cooler Oil pump oil cooler side oil lines Rear exhaust attachment to the frame (crescent shaped thing) with 2 straps - brand new Cam cover timing cover with the timing thing ![]() above mentioned gears all in perfect shape with all the rings and bits needed clutch cable front break lever with container and break line (OEM) clutch lever throttle cables Stator Wiring harness all the insulating tape taken off ready to be rewired. No connections changed yet comes with fuse box and ECM and cables marked with a marking sheet so it's clear where they need connecting. Front fairing in carbon fibre Oil pressure gauge (brand new) neutral sensor speedo sensor HD (OEM) battery - still good, I ran it through a charger/condition checker and it's all green K&N oil filter, unopened. rear shock - complete and working (blue colour coding) front and rear axles foot stand HD formula+ tranny oil (somehow sounds wrong ![]() ignition module 3 spark plugs (brand new) horn pushrods (4) pushrod covers pushrod rollers (between pushrods and cams - sorry don't know how to describe them better) pulley Belt belt tensioner hand controls left and right (thortle side comes with handle) speedo panel oil cooler air scoop engine fan front and rear engine mounts Harris rear paddock stand (designed specifically for buell's rear swingarm) front paddock stand Hydraulic bike lift (like the one in the link but blue) well used http://www.google.co.uk/products/catalo ... ps-sellers Buell bags http://www.ebay.com/itm/saddle-bags-and ... 500wt_1287 If you buy a specific part I will include stainless screws/bolts with it as I have purchased a whole engine rebuild screw set. Front forks and main frame are on ebay but if you can give me a good offer (with a small deposit) I can lift it from there. Frame comes with a V5 document, bike is sorned and no tax needed. Sorry for a long post. Please pm me with items you want and prices you are offering (please research online/ebay prior to offering). Kindest regards and thanks to everyone for viewing and interest |
Author: | kevmean [ 19 Dec 2011 17:40 ] |
Post subject: | Re: 2005 BUELL XB9SX for sale in bits, most of it missing |
You really should keep the cam cover with the main crankcase ...they are line bored to suit so either without the other isn't really a good idea ![]() |
Author: | kuterba [ 19 Dec 2011 18:00 ] |
Post subject: | Re: 2005 BUELL XB9SX for sale in bits, most of it missing |
you speak wisely kevmean, I shall do that. |
Page 1 of 2 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |