| UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
| ZTL2 caliper, line and master cylinder https://www.ukbeg.com/forum/viewtopic.php?f=10&t=10717 |
Page 1 of 1 |
| Author: | Avalaugh [ 19 Apr 2011 22:17 ] |
| Post subject: | ZTL2 caliper, line and master cylinder |
I have a red CR ZTL2 caliper with braided line and master cylinder. In great condition, no scratches. Inc pads but would recommend replacing them. £200 + p&p |
|
| Author: | Avalaugh [ 23 Apr 2011 09:51 ] |
| Post subject: | ZTL2 caliper, line and master cylinder |
|
|
|
| Author: | pash [ 23 Apr 2011 10:29 ] |
| Post subject: | Re: ZTL2 caliper, line and master cylinder |
Shame it's not black otherwise I would have been interested |
|
| Author: | Avalaugh [ 23 Apr 2011 10:36 ] |
| Post subject: | ZTL2 caliper, line and master cylinder |
Typical, I had the black one but I wanted red at the time 
|
|
| Author: | GB [ 24 Apr 2011 12:53 ] |
| Post subject: | Re: ZTL2 caliper, line and master cylinder |
pash wrote: Shame it's not black otherwise I would have been interested Two words Nick "Paint Brush" |
|
| Author: | sillyb [ 24 Apr 2011 14:34 ] |
| Post subject: | Re: ZTL2 caliper, line and master cylinder |
sorry for sounding dumb, but do they really make a difference? and will they fit a standard X1. |
|
| Author: | GB [ 24 Apr 2011 14:41 ] |
| Post subject: | Re: ZTL2 caliper, line and master cylinder |
sillyb wrote: sorry for sounding dumb, but do they really make a difference? and will they fit a standard X1. One word "no" |
|
| Author: | sillyb [ 24 Apr 2011 15:04 ] |
| Post subject: | Re: ZTL2 caliper, line and master cylinder |
Is that no to making difference or no to fitting X1. that's 1 no or 2!! |
|
| Author: | GB [ 24 Apr 2011 15:35 ] |
| Post subject: | Re: ZTL2 caliper, line and master cylinder |
No too fitting |
|
| Author: | Adam [ 24 Apr 2011 17:48 ] |
| Post subject: | Re: ZTL2 caliper, line and master cylinder |
sillyb wrote: Is that no to making difference or no to fitting X1. that's 1 no or 2!! Think about it Mr b 
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|