It is currently 28 Mar 2024 11:31

All times are UTC




Post new topic  Reply to topic  [ 76 posts ]  Go to page Previous 1 2 3 4 5 6 Next
Author Message
PostPosted: 05 Mar 2018 22:21 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
There we go then, thanks! Must be very thin, no wonder its fraught with problems. So I suppose if it looks like the copper wire is touching the main steel body, it probably isn't, because of the enamel.

Maz wrote:
...to be honest the standard reg/rec aint that bad, it's the location that's a problem......they all get red hot and need to be out in the breeze.

On another note, Maz previously said the above, but if I do want to change to a Mosfet, which do I get, or are they all basically the same? There's some one ebay for example, for under £100...

https://www.ebay.co.uk/itm/Mosfet-Volta ... SwbtNaAbmr

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
PostPosted: 06 Mar 2018 17:45 
Offline
User avatar

Joined: 05 May 2009 20:00
Posts: 10849
Current ride: X1 2001
Location: southampton
nigelbread wrote:
The copper wire is coated in shellac, the burning out appears
to be due to overheating due to inadequate oil, hence extra oil spray hole.
oil cooling winding, basically i feel the stator is on occasions running max charge, I am unsure if it has a control module, I have no doubt we will find out!
early Norton ones were encapsulated due to vibration failure!
that does not look very tidy but functional, i have been involved in water pumps that require rewinds for many years

wire thickness and number of turns govern output followed by correct sequence, This would be done by hand big motor stators done on machine
https://www.youtube.com/watch?v=Z5LHrD6OFS4

very neat!

:yt:

..takes me back to my apprenticeship :yup:

_________________
Feros Ferio


Top
PostPosted: 08 Mar 2018 22:12 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
Received my rotor back from Demeanour Customs, nice little oil jet...

Image

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
PostPosted: 09 Mar 2018 17:14 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
That's pretty. Thanks for the pic, I had never actually seen this (very expensive) hole before...

_________________
08 Specialized Langster


Top
PostPosted: 09 Mar 2018 19:01 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
It looks like even worse value for money when you see it from the other side.

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
PostPosted: 09 Mar 2018 19:51 
Offline

Joined: 15 Nov 2014 20:36
Posts: 215
Current ride: .....
FerrisBueller wrote:
It looks like even worse value for money when you see it from the other side.

how much?


Top
   
PostPosted: 09 Mar 2018 20:10 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
FerrisBueller wrote:
Received my rotor back from Demeanour Customs, nice little oil jet...

Image



Nice one


Top
PostPosted: 09 Mar 2018 20:12 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
nigelbread wrote:
FerrisBueller wrote:
It looks like even worse value for money when you see it from the other side.

how much?



£100 I think


Top
PostPosted: 09 Mar 2018 21:12 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
FerrisBueller wrote:
It looks like even worse value for money when you see it from the other side.

But money well spent so I understand...

_________________
08 Specialized Langster


Top
PostPosted: 09 Mar 2018 23:54 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
Kiwi wrote:
nigelbread wrote:
FerrisBueller wrote:
It looks like even worse value for money when you see it from the other side.

how much?

£100 I think


£138 (It was £100, but then VAT and P&P)

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
PostPosted: 10 Mar 2018 00:03 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
Its all back together now. The hardest thing turned out to be threading the stator wires back up to under the seat. Thank god I left a red wire there when I yanked it out, but it was still pretty tough...

Image

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
PostPosted: 14 Mar 2018 12:32 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
By the way, my battery is now getting a pretty healthy and steady 14.21V.

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
PostPosted: 14 Mar 2018 12:33 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Great news

_________________
08 Specialized Langster


Top
PostPosted: 28 Jun 2018 22:18 
Offline
User avatar

Joined: 05 Mar 2018 00:09
Posts: 334
Current ride: 1125 CR, XT500, 750S
Location: Tiddly village near the throbbing metropolis of Rugby
FerrisBueller wrote:
By the way, my battery is now getting a pretty healthy and steady 14.21V.

Ferris, is this still the case?.....my 1125CR ( new rectifier, stator rewind and oil way drilled rotor) had a low voltage reading according to the dash last week, and I cut short a ride in case of failure. It was a hot day and I was moving slowly through traffic, then stopped and parked for an hour. On restart it was just about 12v when normally it's up in the 14v range.
On the journey home it improved once moving and after checking the wiring connections and the outputs once home,all seems good again.
My thoughts were that the heat from the slow moving traffic and the heat soak whilst parked caused the drop.
One thing I did notice was that the mosfet regulator gets super warm...too hot to touch without wincing. It's been fitted with heat transfer pads at the mounting point to aid heat transfer to the frame but still felt flipping hot.
This maybe also suffered in the heat of the traffic.
Anyway....just wondered if your problems are totally rectified.....see what I did there... :D

_________________
Caution: I run with scissors.


Top
PostPosted: 28 Jun 2018 22:38 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
Ohsteveo wrote:
FerrisBueller wrote:
By the way, my battery is now getting a pretty healthy and steady 14.21V.

Ferris, is this still the case?.....my 1125CR ( new rectifier, stator rewind and oil way drilled rotor) had a low voltage reading according to the dash last week, and I cut short a ride in case of failure. It was a hot day and I was moving slowly through traffic, then stopped and parked for an hour. On restart it was just about 12v when normally it's up in the 14v range.
On the journey home it improved once moving and after checking the wiring connections and the outputs once home,all seems good again.
My thoughts were that the heat from the slow moving traffic and the heat soak whilst parked caused the drop.
One thing I did notice was that the mosfet regulator gets super warm...too hot to touch without wincing. It's been fitted with heat transfer pads at the mounting point to aid heat transfer to the frame but still felt flipping hot.
This maybe also suffered in the heat of the traffic.
Anyway....just wondered if your problems are totally rectified.....see what I did there... :D


Well I used it with no problems for about a month, but now it's just been sat in my garage, missing out on all the hot heat and traffic. (I moved house and prefer my Harley for the longer motorway commute, so it's up for sale)

I thought the mosfet rectifiers were supposed to run cooler too? Mine's the standard shunt type still. I'll test it again at the weekend out of curiosity.

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 76 posts ]  Go to page Previous 1 2 3 4 5 6 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited