It is currently 28 Mar 2024 19:45

All times are UTC




Post new topic  Reply to topic  [ 45 posts ]  Go to page 1 2 3 Next
Author Message
 Post subject: Buell Mileage Reports
PostPosted: 03 Dec 2013 12:06 
Offline
Moderator
User avatar

Joined: 05 May 2009 17:04
Posts: 3303
Current ride: 2 Buells + 3 Guzzis
Location: West Yorkshire
This topic is intended to be a suppository ( :D ) for details of what it's actually like to own and run a Buell. It will form an easy reference tool for both existing and prospective Buell owners. You don't have to be an ace wordsmith to contribute, just the briefest information will do.

For example:
XB9/12 - bought new 01-01-04, mileage to date 40,000, official dealer/independent specialist/self serviced, no major problems/or loads of problems, wheel bearings replaced on average every 5,000 miles, steering head bearings replaced every 10,000 miles. Now on its 2nd drive belt, updated oil pump drive fitted at 00000 miles .....you get the idea....

_________________
Chris & Jane Jessop
Founders of UKBEG April 1998

www.ukbuellgroup.co.uk


Top
PostPosted: 03 Dec 2013 15:40 
Here's my contribution:

XB12 SCG Lightning
1st registered 14.12.2006
Second keeper (me) 1.2.2009
Mileage 11336 (I did only 350 mile this year :cry: )
Wheel Bearings renewed at 10K
Grease Nipple mod
Air Box Mod
K&N Air Filter
Remus Exhaust
Datatool Alarm
Left Hand Scoop
Original Drive Belt (fingers crossed)
Taller Screen
Special Decals
LED Indicators

Serviced by me (HD way too expensive)

Runs nice and smooth, most of the time. Very low revs always a slight cough.

Fantastic machine :D


Top
   
PostPosted: 04 Dec 2013 00:16 
Offline
Think Pink
User avatar

Joined: 07 Jun 2010 00:37
Posts: 3777
Current ride: Awesome Ulysses & X1
Location: balderton, newark
OOO K........grumbly expired at around 30.000 :yup: ,oil pump drive gear finnaly wore out :rotfl: :rotfl: :rotfl: :rotfl: .in its short life consumed.........4 set o front wheel bearings / 4 sets o rear wheel bearings / 4 set o ideler wheel bearings / one set o steering head bearings ,three belts,1 injector,1 reg rectifier ,1 set o fork seals ,two speed sensors ,first engine strip at 15.000 miles due needell bearing failer in fith gear :evil: :rotfl: :rotfl: :rotfl: :rotfl: currently under referb /rebuild ...ps cant live without it :yup:


Attachments:
292988_3177135086326_635157724_n.jpg
292988_3177135086326_635157724_n.jpg [ 110.98 KiB | Viewed 4342 times ]

_________________
IF IT BLEEDS WE CAN KILL IT ,THIS STUFF WILL MAKE YOU A GODDAM SEXUAL TYRANASURUS ,YOUVE BEEN PUSHING TOO MANY PENCILS DILLON .GET TO THE CHOPPER
Top
PostPosted: 04 Dec 2013 00:27 
Offline
Think Pink
User avatar

Joined: 07 Jun 2010 00:37
Posts: 3777
Current ride: Awesome Ulysses & X1
Location: balderton, newark
OOO K,grumbly 2 ..perchased this march with 16.600 miles ont clock now with 23.350 miles ont clock..... consumed..................ahh 1 set o front wheel bearings :yup: :D :D mods.... one o my front engine mounts ,no probs so far :ner: ......... my sprung ideler wheel four a more constant belt tension still working juuuust fine :ner: LOOOOOVE IT ........the BEST tool for going to southern irland on :worthy:


Attachments:
Picture 978.jpg
Picture 978.jpg [ 514.08 KiB | Viewed 4341 times ]

_________________
IF IT BLEEDS WE CAN KILL IT ,THIS STUFF WILL MAKE YOU A GODDAM SEXUAL TYRANASURUS ,YOUVE BEEN PUSHING TOO MANY PENCILS DILLON .GET TO THE CHOPPER
Top
PostPosted: 04 Dec 2013 08:07 
Offline
User avatar

Joined: 07 Nov 2011 18:10
Posts: 4041
Current ride: Buell ulysses
Location: Telford
prior to buying my uly low milage and still low milage :headbang: works been getting in the way :headbang: I asked and did recieve this very detailed report form ray and his service history and problems he found with his bike
please see attached pdf file :yup:


Attachments:
rays uly service log.pdf [91.47 KiB]
Downloaded 276 times

_________________
Buell Ulysses XB12X 06/08
Top
PostPosted: 04 Dec 2013 08:37 
Offline
Moderator
User avatar

Joined: 05 May 2009 17:04
Posts: 3303
Current ride: 2 Buells + 3 Guzzis
Location: West Yorkshire
Wow, that is some mileage report - very useful. Thanks for posting :yup: ....

_________________
Chris & Jane Jessop
Founders of UKBEG April 1998

www.ukbuellgroup.co.uk


Top
PostPosted: 04 Dec 2013 17:11 
Offline

Joined: 20 Jul 2012 23:20
Posts: 1080
Current ride: 2001 X1//TRK 502x
Location: surrey
2001 X1 purchased @ 9 months old,serviced by me until last year currenty shows approx 14.000 miles has done about 16-17 as speedo sensor failed two batteries in this time along with rectifier. Original bearings and belt drive, all well until this year when poor running caused little use. After being ripped off by an unknowledgable con shop the bike was given to Maz who promptly and affordably repaired the problem. fitted with Maz niple mod, free breathing system. Only other consumables to date are three rear tyres,two front, one set of front breakshoes. Has under gone a few cosmetic modifications.


Top
PostPosted: 04 Dec 2013 20:37 
Offline
Milf Hunter
User avatar

Joined: 06 May 2009 16:47
Posts: 4632
Current ride: '98 S1
Location: Wessex
IBIS wrote:
one set of front breakshoes.


:shock: lOl

_________________
I started out with nothing and still got most of it left.


Top
PostPosted: 04 Dec 2013 22:23 
Offline

Joined: 20 Jul 2012 23:20
Posts: 1080
Current ride: 2001 X1//TRK 502x
Location: surrey
:o :roll: :hehe: :coat:


Top
PostPosted: 06 Dec 2013 21:38 
Offline

Joined: 14 Sep 2009 01:48
Posts: 43
Current ride: xb9s
Location: Southampton
XB9S 2004 Purchased in 2007 with 3000 miles on clock. Belt snapped at 10000 miles and replaced. Self serviced. Free spirit tensioner fitted. Neural light played up but fixed. Tail tidy fitted small led indicators fitted wheels powder coated black. Buell Indicator wires striped of insulation by vibration under fly screen.
Exhaust rotted out two year ago and second had one fitted. One new battery one new head light bulb.
All bearings seem ok nothing spotted on mot's clutch cable snapped middle of year £60 fooking HD tossers. Exhaust nuts at cylinder head heavily corroded 30000 miles now thats it touch wood !


Top
PostPosted: 09 Dec 2013 21:59 
Offline

Joined: 20 Sep 2009 20:42
Posts: 598
Current ride: XB12SS Tiger S R9T
Location: Barlick Yorkshire
XB12SS purchased new 2008.Countless tyres consumed ,1 set of front wheel bearings' one set of rear wheel bearings, fs belt tensioner, oberon levers and bar end mirrors, tony archer seat ,albert exhaust (including headers), home made tail tidy and I've chopped a few other unnecessary bits off.Self serviced.To date 25 000 trouble free miles :shut:


Attachments:
20130707_144507-8.jpg
20130707_144507-8.jpg [ 1.91 MiB | Viewed 4169 times ]
Top
PostPosted: 12 Dec 2013 17:19 
Offline

Joined: 14 Sep 2009 01:48
Posts: 43
Current ride: xb9s
Location: Southampton
Here is a pic of my little Buell. Whats the big deal with the wheel bearings ? Mine were checked when I had wheels powder coated and they were fine so I didn't replace them as I had planed.


Attachments:
IMG_0684.JPG
IMG_0684.JPG [ 762.62 KiB | Viewed 4121 times ]
Top
PostPosted: 12 Dec 2013 22:00 
airbraker wrote:
Here is a pic of my little Buell. Whats the big deal with the wheel bearings ? Mine were checked when I had wheels powder coated and they were fine so I didn't replace them as I had planed.

People over tighten the spindles and nip the bearings, when fitting a wheel there is a torque setting for the spindle most people don't realise.
I didn't!


Top
   
PostPosted: 02 Jan 2014 13:06 
2007 XB12X with luggage: 14,800, purchased at 3 yrs old when allegedly just had full 10k service ( by non-HD mechanic ). Fitted Albert can, K&N, lowered 45mm with shorter wilbers 631 shock, white wire mod, race ECU. Minor service & checked over by Tubbs on ocasions.

no failures to date, although lh indicator occasionally decides its too tired to function.


2002 X1: 10,500, purchased 2013 when reported to have full 10k service from NHVT, Wiley Co can and round pan filter of unknown brand. Fitted clutchlite XXl, and bar-end weights.

reset button for tacho replaced, has shaken gear lever off requiring new bushes ( wasnt the correct inner bush in the first place - hence failure ), starter clutch failed.


1997 S3T: 37,500km purchased in 2012 from previous owner for 12 yrs; V&H SST2 can plus gutted original ( which also fits the X1 for ITV tests ), milled footrests. 2 oil changes and pump drive gear checked - unworn.

replaced faulty sidestand switch, battery died, starter motor brushes burnt out when old battery wasnt cranking properly. left pannier latch broken ( and unobtainable ). occasionally start button decides its got better things to do than sending electrickery to the starter.


all in all, they have a pretty easy life with me, but so far have not let me down too expensively.


Top
   
PostPosted: 02 Jan 2014 14:03 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
ant69 wrote:
no failures to date, although lh indicator occasionally decides its too tired to function.

Wire broken at headstock. Mine did the same. Check my Uly 10k service thread.

_________________
08 Specialized Langster


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 45 posts ]  Go to page 1 2 3 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited