how to adjust headlamp angle on uly

thanks

There's a screw on the underside of the two headlights you loosen, adjust the headlights then tighten it again.

The headlights pivot.
Underneath the light unit is a metal slider with a black torx head bolt. Loosen that then you can change the angle of the lights. Can't remember off the top of my head if you have to loosen the pivots. If you do they are accessed at the side of the light unit through a big hole.

You can use the torx key from your toolbox.

If you still can't get it I can post a pic tommorow.

I suspect he sorted it 6 months ago

_________________
Wear the fox hat

thanks for the info and for taking the time to reply; yes i did sort it a little time ago

Someone else had PM'd me looking for info on it - hence the thread bump

i cannot tell a lie - it woz me !

illuminating the lower branches of trees far and wide.

thanks for the bump - i will have another look.

with mine, it looks as though the bolt that need to be loosened is the tiny vertical torx screw that protrudes through to the underneath of the mudguard - that sits in a
front-to-back slot which will allow the light unit to pivot up and down ( a small amount ).

i can see the larger pivot torx screws, accessible through the holes in the cowling, if they need to be loosened.

thanks for the help.