Last visit was: Fri Oct 20, 2017 7:25 am It is currently Fri Oct 20, 2017 7:25 am

All times are UTC+01:00




 [ 8 posts ] 
Author Message
PostPosted: Tue Nov 02, 2010 1:29 pm 
Offline
User avatar

Joined: Tue Jun 23, 2009 6:10 pm
Posts: 119
Location: Worthing Sussex
how to adjust headlamp angle on uly

thanks


Top
   
 
PostPosted: Thu Nov 04, 2010 11:39 am 
Offline
User avatar

Joined: Wed May 06, 2009 5:54 pm
Posts: 788
Location: Edinburgh
There's a screw on the underside of the two headlights you loosen, adjust the headlights then tighten it again.


Top
   
 
PostPosted: Thu Apr 28, 2011 1:09 pm 
Offline
User avatar

Joined: Wed May 06, 2009 5:54 pm
Posts: 788
Location: Edinburgh
The headlights pivot.
Underneath the light unit is a metal slider with a black torx head bolt. Loosen that then you can change the angle of the lights. Can't remember off the top of my head if you have to loosen the pivots. If you do they are accessed at the side of the light unit through a big hole.

You can use the torx key from your toolbox.

If you still can't get it I can post a pic tommorow.


Top
   
 
PostPosted: Thu Apr 28, 2011 1:15 pm 
Offline
User avatar

Joined: Wed May 06, 2009 1:55 pm
Posts: 4336
Current ride: 98 S1W
Location: Perth, not the Scottish one
yourguitarhero wrote:
If you still can't get it I can post a pic tommorow.


I suspect he sorted it 6 months ago lOl


Top
   
 
PostPosted: Thu Apr 28, 2011 4:31 pm 
Offline
User avatar

Joined: Tue Jun 23, 2009 6:10 pm
Posts: 119
Location: Worthing Sussex
thanks for the info and for taking the time to reply; yes i did sort it a little time ago


Top
   
 
PostPosted: Fri Apr 29, 2011 9:28 am 
Offline
User avatar

Joined: Wed May 06, 2009 5:54 pm
Posts: 788
Location: Edinburgh
Someone else had PM'd me looking for info on it - hence the thread bump


Top
   
 
PostPosted: Fri Apr 29, 2011 12:16 pm 
Offline
User avatar

Joined: Fri Aug 13, 2010 2:33 pm
Posts: 637
Current ride: none : <sniff>
Location: Torrox, España
i cannot tell a lie - it woz me !

illuminating the lower branches of trees far and wide.

thanks for the bump - i will have another look.

_________________
Life is like a sewer: what you get out of it depends on what you put into it.


Top
   
 
PostPosted: Mon May 02, 2011 6:37 pm 
Offline
User avatar

Joined: Fri Aug 13, 2010 2:33 pm
Posts: 637
Current ride: none : <sniff>
Location: Torrox, España
with mine, it looks as though the bolt that need to be loosened is the tiny vertical torx screw that protrudes through to the underneath of the mudguard - that sits in a
front-to-back slot which will allow the light unit to pivot up and down ( a small amount ).

i can see the larger pivot torx screws, accessible through the holes in the cowling, if they need to be loosened.

thanks for the help.

_________________
Life is like a sewer: what you get out of it depends on what you put into it.


Top
   
 
 [ 8 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: Tadpole and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited