UK Buell Enthusiasts Group https://www.ukbeg.com/forum/ |
|
Stock vs SE cams for x1/s3 https://www.ukbeg.com/forum/viewtopic.php?f=8&t=22852 |
Page 1 of 1 |
Author: | brother in buells [ 19 Dec 2017 19:44 ] |
Post subject: | Stock vs SE cams for x1/s3 |
Can some of you tell me if the stock (B) cams and se (screaming eagle) cams for the x1 and s3 have the same lobes I know they have differend teeth and numbers. Thanks |
Author: | pash [ 19 Dec 2017 20:50 ] |
Post subject: | Re: Stock vs SE cams for x1/s3 |
Euro S1/X1/S3/M2 used SE 497 cams |
Author: | brother in buells [ 19 Dec 2017 21:00 ] |
Post subject: | Re: Stock vs SE cams for x1/s3 |
Thanks Nick ,i figured that out in the meantime. And also got a set of gears |
Author: | Pan [ 19 Dec 2017 22:37 ] |
Post subject: | Re: Stock vs SE cams for x1/s3 |
What is regarded as the best uprated performance cam for a late model X1 that doesn't require pocketing pistons and the like? Mark |
Author: | Maz [ 19 Dec 2017 23:44 ] |
Post subject: | Re: Stock vs SE cams for x1/s3 |
OEM |
Author: | pash [ 20 Dec 2017 11:36 ] |
Post subject: | Re: Stock vs SE cams for x1/s3 |
Maz wrote: OEM I put 536s (the next lift up from the stock) in one of mine and there is significant lift at TDC which means some modification to the valve pockets. viewtopic.php?p=171616#p171616 |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |