UK Buell Enthusiasts Group
http://www.ukbeg.com/forum/

Ecmdroid
http://www.ukbeg.com/forum/viewtopic.php?f=8&t=22108
Page 1 of 1

Author:  ribi [ Fri Jan 20, 2017 9:46 am ]
Post subject:  Ecmdroid

Ok guys I have 2002 xb9s I went into set up to do afv setting r cylinder at 100 ,,but I get message ,,EEPROM burning disabled by configuration ,can some body please tell me what to or how to do it ,many thanks

Author:  pash [ Fri Jan 20, 2017 12:13 pm ]
Post subject:  Re: Ecmdroid

I can't cos I've never used ECMDroid... Sorry...

Author:  ribi [ Fri Jan 20, 2017 12:56 pm ]
Post subject:  Re: Ecmdroid

That's no good is it download it and try it it's free you've got the Bluetooth my ecmspy never got sorted at the public key file, the t5 was ok but Bluetooth messed up

Author:  pash [ Fri Jan 20, 2017 2:04 pm ]
Post subject:  Re: Ecmdroid

No interest from my end...

Author:  marcus_asparagus [ Fri Jan 20, 2017 3:08 pm ]
Post subject:  Re: Ecmdroid

Hey Ribi,

For ECM droid you will have to go into settings and check the box to enable EEPROM burning.

It warns you to do this at your own risk! Until this box is checked you will not be able to change things on your bike.

Good luck with it.

Author:  ribi [ Fri Jan 20, 2017 4:03 pm ]
Post subject:  Re: Ecmdroid

Nice 1 thanks,that was easy,have you ever change/downloaded a map

Author:  marcus_asparagus [ Fri Jan 20, 2017 6:05 pm ]
Post subject:  Re: Ecmdroid

No sorry, only used it to save my own eeprom, to test the fan and to check the afv to see if it's running ok, oh and to reset the tps.

There is loads of info out there on how to do these things, just be careful and make multiple copies before you go changing anything and save them to different locations too.........you could I guess end up bricking your ecm!

Have fun learning and report back what you end up doing.

Cheers.

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/