UK Buell Enthusiasts Group
http://www.ukbeg.com/forum/

99 X1 Start noise
http://www.ukbeg.com/forum/viewtopic.php?f=8&t=22098
Page 1 of 2

Author:  BobbyFisher [ Sun Jan 15, 2017 10:59 pm ]
Post subject:  99 X1 Start noise

Hi. When Im starting first meter or so I got knock like engaging a gear maybe a little bit louder but sounds like this. Bike fills like somewhere is plenty of loos! I need to exclude drive chain. The other day I tight chain so tight that bearings start to whistling and knock and loos was still present. What I think is I got gear box problem. Maybe one of this four teeth missing. Any one got a clue? I don't want to open a gear box just for check! Any other things what can be loos in drive/transmission?

Author:  Maz [ Sun Jan 15, 2017 11:07 pm ]
Post subject:  Re: 99 X1 Start noise

:headbang:

Author:  Kiwi [ Sun Jan 15, 2017 11:25 pm ]
Post subject:  Re: 99 X1 Start noise

BobbyFisher wrote:
Hi. When Im starting first meter or so I got knock like engaging a gear maybe a little bit louder but sounds like this. Bike fills like somewhere is plenty of loos! I need to exclude drive chain. The other day I tight chain so tight that bearings start to whistling and knock and loos was still present. What I think is I got gear box problem. Maybe one of this four teeth missing. Any one got a clue? I don't want to open a gear box just for check! Any other things what can be loos in drive/transmission?



Sounds a bit shithouse to me Bobby. I hope its not too much of a big problem. Keep us posted.

Author:  Maz [ Sun Jan 15, 2017 11:30 pm ]
Post subject:  Re: 99 X1 Start noise

95% of Buells suffer from this.......there's 2 solutions, one of which is very expensive :)

Author:  pash [ Mon Jan 16, 2017 7:16 am ]
Post subject:  Re: 99 X1 Start noise

As Maz says, striking dogs are worn on the first gear. My X1 does it.

A quick search of the forum:

viewtopic.php?f=8&t=20500

Author:  coco [ Mon Jan 16, 2017 8:50 am ]
Post subject:  Re: 99 X1 Start noise

My m2 does it and most of time using cheap solution is fine . Ist gear hairpins in the pyrenees is very entertaining though :rotfl:

Author:  BobbyFisher [ Tue Jan 17, 2017 1:06 am ]
Post subject:  Re: 99 X1 Start noise

Pash Maz I don't know what you talking about. I don't like idea my bike can fail at any time. Bought this coz I thought gonna be bullet proof bike. Think this is great bike but Im getting disappointed. What is that expensive way? I put so much money to this bike is not gonna hurt me any more. Can you guys post a picture or link that i can see that part what failed. From there I should be ok. :askmaz:

Author:  BobbyFisher [ Tue Jan 17, 2017 1:10 am ]
Post subject:  Re: 99 X1 Start noise

And maybe this thing causing my drive belt problems :sun: snapping often?????

Author:  Kiwi [ Tue Jan 17, 2017 1:39 am ]
Post subject:  Re: 99 X1 Start noise

Image

Author:  BobbyFisher [ Tue Jan 17, 2017 1:46 am ]
Post subject:  Re: 99 X1 Start noise

picture of the one part please not every each part.

Author:  Kiwi [ Tue Jan 17, 2017 1:57 am ]
Post subject:  Re: 99 X1 Start noise

:)

Author:  barney [ Wed Jan 18, 2017 9:16 am ]
Post subject:  Re: 99 X1 Start noise

BobbyFisher wrote:
And maybe this thing causing my drive belt problems :sun: snapping often?????

maybe this thing is :drive belt to tight :headbang: "snapping often" :idea: and now gearbox bearings gone :coat:

Author:  gibbsy [ Wed Jan 18, 2017 11:14 pm ]
Post subject:  Re: 99 X1 Start noise

barney wrote:
BobbyFisher wrote:
And maybe this thing causing my drive belt problems :sun: snapping often?????

maybe this thing is :drive belt to tight :headbang: "snapping often" :idea: and now gearbox bearings gone :coat:


:yt: :headbang: :headbang:

Author:  BobbyFisher [ Thu Jan 19, 2017 2:42 am ]
Post subject:  Re: 99 X1 Start noise

Thanks for help. :headbang: doing this often mostly coz a bike :rotfl:
Phi gears bearings. You sure I though I need to change a first gear or whole gearbox. Thing is bearing noise is mote like a constant grinding or knocking and when I start is just one single knock and thats it bike fills great. I was changed bearings in back wheel month ago and clutch pressing plate bearing noise is nothing like was in this two. I just can't believe thats bearings.

Author:  BobbyFisher [ Thu Jan 19, 2017 3:16 am ]
Post subject:  Re: 99 X1 Start noise

Striking dogs I was imaging that gonna be this. Gonna check this topic tomorrow. I can't live with this. Why this happened (worn) my bike got maybe 15000 miles :cry: :disappointment:

Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/