Intake manifold seals on my 06 Ully are letting in air. Brake cleaner squirted in general direction and rise in revs confirmed, air leak. Manual says to disconnect all the bits and remove the throttle body through the top of the bike. I have removed the air box and I am wondering if this is possible. The intake manifold bolts and the manifold to cylinder brace look unaccessable without dropping the engine forward. Is this correct ?

No, it is do-able without rotating the engine down.......just need decent tools

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR