you need to have a look at the Buell dog bone front mount , as Maz says
it wont fit what you have ..but you need some sort of isolastic mount at the front
or that will snap with the Buell vibration unfortunately

_________________
Feros Ferio

....and take out the studs in the heads !

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

OK I will do something to modify it ,where abouts do you take the front mount from, does anyone have a picture so I can manufacture one.

_________________
Buell S1 Lightning
Triumph Rocket3
Suzuki GT750
Kawasaki H1B
Honda 400 Four
Royal Enfield Bullet Diesel.
Kawasaki Z1300 ( current project)

From the side picture, it looks to me like the front surface of the muffler is several inches too far forward. Using a standard Buell type mount off the front of the crankcase, I think you are going to need some straight pipe between the elbow and the muffler. Right now, you don't have that.

_________________
Try doing this to yer fueller...........

What's that plate where the rectifier should be ?

_________________
Last year I joined a group for anti-social people
We haven't met yet.

It's a North Carolina tax disk that ran out in 1999.

_________________
Buell S1 Lightning
Triumph Rocket3
Suzuki GT750
Kawasaki H1B
Honda 400 Four
Royal Enfield Bullet Diesel.
Kawasaki Z1300 ( current project)

Is this the sort of mount I require?

_________________
Buell S1 Lightning
Triumph Rocket3
Suzuki GT750
Kawasaki H1B
Honda 400 Four
Royal Enfield Bullet Diesel.
Kawasaki Z1300 ( current project)

The later type front mount is this one -

_________________
Try doing this to yer fueller...........

Early S1

_________________
Last year I joined a group for anti-social people
We haven't met yet.

I think I should be able to make something like that.

_________________
Buell S1 Lightning
Triumph Rocket3
Suzuki GT750
Kawasaki H1B
Honda 400 Four
Royal Enfield Bullet Diesel.
Kawasaki Z1300 ( current project)

I'm going to modify the front of the pipe to take one of the Buell front header mounts with the sealastic bush what should I use at the back if they keep snapping the straps, is there a rear flexible mount?

_________________
Buell S1 Lightning
Triumph Rocket3
Suzuki GT750
Kawasaki H1B
Honda 400 Four
Royal Enfield Bullet Diesel.
Kawasaki Z1300 ( current project)

Where could I get one of them from ?

_________________
Buell S1 Lightning
Triumph Rocket3
Suzuki GT750
Kawasaki H1B
Honda 400 Four
Royal Enfield Bullet Diesel.
Kawasaki Z1300 ( current project)

Riders in Bristol. Ask politely for UKBEG discount. Note - They may be no longer available. Many important tube frame parts are like that now I'm afraid.

_________________
Try doing this to yer fueller...........

I keep them in stock £80.23 but don't do mail order.
They are still available and Riders will get them for you.
Part no. S0121.01A1

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Ive got a mate that stays near you so I will get him at some time to pop along to your place, I may wait a while and get a few bits at the same time , the bike will be coming off the road ,I think I will add 2" to the pipe at the front of the silencer and weld on a lug to match up with one of these brackets I will have another think about the rear band as well.

_________________
Buell S1 Lightning
Triumph Rocket3
Suzuki GT750
Kawasaki H1B
Honda 400 Four
Royal Enfield Bullet Diesel.
Kawasaki Z1300 ( current project)