UK Buell Enthusiasts Group
http://www.ukbeg.com/forum/

1125CR rear brake
http://www.ukbeg.com/forum/viewtopic.php?f=7&t=22540
Page 1 of 1

Author:  FerrisBueller [ Mon Jul 31, 2017 7:31 pm ]
Post subject:  1125CR rear brake

Howdy, I searched through old posts and found some recommendations for fitting a Brembo caliper, and would just like to confirm exactly which one it is; P34?

Is it a direct replacement? Is it that much better? In the old threads from 2013 they were saying it would be good as spares dwindle, but currently I can find tons of pads that fit the OEM caliper, so is it really worth the £150?

Author:  pash [ Mon Jul 31, 2017 8:23 pm ]
Post subject:  Re: 1125CR rear brake

Think Albert fitted a P32F

Like so...

https://www.ebay.co.uk/itm/122598881561

Author:  FerrisBueller [ Mon Jul 31, 2017 11:32 pm ]
Post subject:  Re: 1125CR rear brake

Hmm, based on this page (https://www.steadygarage.com/store/raci ... ke-caliper) I think the P32 and P34 are the same mounts, only differ in the angle of the banjo/bleed holes.

Is it really a worthy upgrade, as these rear calipers are all a very simple 2 piston design?

Any brake disc recommendations while I'm at it?

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/