Last visit was: Sat Dec 16, 2017 7:28 pm It is currently Sat Dec 16, 2017 7:28 pm

All times are UTC+01:00




 [ 18 posts ]  Go to page 1 2 Next
Author Message
 Post subject: 2000 X1
PostPosted: Fri Jun 16, 2017 9:49 pm 
Offline

Joined: Tue Jan 31, 2012 12:17 am
Posts: 46
Current ride: X1 Lightning
Location: I'm in Staines!
Hi

I came home from a short ride on my X1, and began to check a few things over on the bike, and discovered something was missing from the centre on the front engine pulley, where a needle roller cage was visible, what should fit in there?

Also there is about 2-3mm movement of lateral play (to and fro) between the front brake disc and carrier, i guess some play should exist but is this excessive and dangerous. (It is a Braking Wavy disc assy)

Thanks in advance Steve


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Fri Jun 16, 2017 10:11 pm 
Offline
User avatar

Joined: Fri May 22, 2009 6:43 pm
Posts: 1859
Current ride: S1`s
Location: Llanelli South Wales
search.php?keywords=maz+nipple&terms=all&author=&sc=1&sf=all&sk=t&sd=d&sr=posts&st=0&ch=300&t=0&submit=Search Read some of this link.


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Fri Jun 16, 2017 10:12 pm 
Offline
proff. patpending
User avatar

Joined: Wed May 06, 2009 8:20 pm
Posts: 14227
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Oh dear. Sounds like you should have had a lube plug to keep the needle rollers happy. :maz: will be along in a minute, but if it were mine, I would:

1. Tap the needle rollers back in with a nicely fitting socket
2. Fit a lube plug and squirt in plenty of LM grease
3. Buy an EBC Pro-Lite disc
4. Buy and fit a Lucky Hands oil pump drive gear (to save you coming back to tell us your engine has lunched)

Any pics of your bike? I love pics me...

_________________
08 Specialized Langster


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Fri Jun 16, 2017 10:14 pm 
Offline
Site Admin
User avatar

Joined: Wed Apr 15, 2009 5:17 pm
Posts: 7877
Location: Manchester
:yt:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Fri Jun 16, 2017 11:19 pm 
Offline

Joined: Tue Jan 31, 2012 12:17 am
Posts: 46
Current ride: X1 Lightning
Location: I'm in Staines!
Image

Hi

Thanks for your replies.

Briefly browsing through the links you suggested, it seems i need to get in touch with Maz for this to get sorted. This is going to scare the ££££ out of me, from reading past threads, as there are other items requiring attention.

See photo of my new purchase.

So if anyone recognizes their old bike please get in touch.

Steve


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sat Jun 17, 2017 6:55 am 
Offline
proff. patpending
User avatar

Joined: Wed May 06, 2009 8:20 pm
Posts: 14227
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Lots of pretty parts... :mrgreen:

_________________
08 Specialized Langster


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sat Jun 17, 2017 10:01 am 
Offline

Joined: Tue Jun 08, 2010 4:34 pm
Posts: 583
Current ride: m2 cyclone
Location: leicester
Maz half the cost a twice the better work than a harley shop


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sat Jun 17, 2017 9:48 pm 
Offline

Joined: Thu May 07, 2009 9:27 pm
Posts: 1083
Location: Glossop in't th'hills
Get it up to maz. It's the best thing you could do for it if it's a keeper or you could sell it to me for a couple of grand :hehe:


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sun Jun 18, 2017 11:38 am 
Offline
User avatar

Joined: Wed May 06, 2009 6:54 pm
Posts: 1350
Current ride: Hypermotard 1100S
Location: West Lothian, Bonnie Scotland
Loving that rear pulley. Anyone know where to get one?

Nice looking bike :yup:

_________________
Better to Burn Out Than Fade Away


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sun Jun 18, 2017 5:56 pm 
Offline

Joined: Thu May 07, 2009 9:27 pm
Posts: 1083
Location: Glossop in't th'hills
t965m wrote:
Loving that rear pulley. Anyone know where to get one?

Nice looking bike :yup:


It's a Rizoma tuber pulley Clive. No longer made I'm afraid. Though Twin motorcycles do 61 and 55 tooth blanks I think then you need to ask a machining genious like big Andy to weave his magic. Hey presto :yup:


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sun Jun 18, 2017 6:30 pm 
Offline
proff. patpending
User avatar

Joined: Wed May 06, 2009 8:20 pm
Posts: 14227
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
t965m wrote:
Loving that rear pulley. Anyone know where to get one?

Nice looking bike :yup:

Dickie Bird tells me they wear out fast...

_________________
08 Specialized Langster


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sun Jun 18, 2017 6:39 pm 
Offline

Joined: Thu May 07, 2009 9:27 pm
Posts: 1083
Location: Glossop in't th'hills
pash wrote:
t965m wrote:
Loving that rear pulley. Anyone know where to get one?

Nice looking bike :yup:

Dickie Bird tells me they wear out fast...


They need hard anodising after machining. Then powder coating to a colour of your choice but not powder coating the teeth


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sun Jun 18, 2017 6:55 pm 
Offline
proff. patpending
User avatar

Joined: Wed May 06, 2009 8:20 pm
Posts: 14227
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
DaveH wrote:
pash wrote:
t965m wrote:
Loving that rear pulley. Anyone know where to get one?

Nice looking bike :yup:

Dickie Bird tells me they wear out fast...


They need hard anodising after machining. Then powder coating to a colour of your choice but not powder coating the teeth

Can I have soft anodising?

_________________
08 Specialized Langster


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sun Jun 18, 2017 6:58 pm 
Offline
User avatar

Joined: Tue May 05, 2009 8:00 pm
Posts: 8160
Current ride: Buell X1 2001
Location: southampton
pash wrote:
DaveH wrote:
pash wrote:
t965m wrote:
Loving that rear pulley. Anyone know where to get one?

Nice looking bike :yup:

Dickie Bird tells me they wear out fast...


They need hard anodising after machining. Then powder coating to a colour of your choice but not powder coating the teeth

Can I have soft anodising?


only on cake ;)

_________________
Obey the principles without being bound by them.
Bruce Lee


Top
   
 
 Post subject: Re: 2000 X1
PostPosted: Sun Jun 18, 2017 7:00 pm 
Offline
proff. patpending
User avatar

Joined: Wed May 06, 2009 8:20 pm
Posts: 14227
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Nutah wrote:

only on cake ;)

Had a massive slice of carrot cake in a cafe in Kineton on the Banbury Run today...

_________________
08 Specialized Langster


Top
   
 
 [ 18 posts ]  Go to page 1 2 Next

All times are UTC+01:00


Who is online

Users browsing this forum: CommonCrawl [Bot] and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited