Anyone got a spare exhaust bracket for my X1 one has snapped with bolt/nut and washers missing. Could probably get bracket welded but missing bolt and strange shaped washer which accommodates the bolt with a spine.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Riders? Maz?

_________________
08 Specialized Langster

Maz got them just getting them over to me.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Need a pipewerx can mate, you've got the right headers just need the right can.
I can post you the bits from Maz if you want?

_________________
Buell folks is nice folks.
Awesome X1, well Mazzed (& the best colour)
Built in America, refined in Dukinfield....

That's the header bracket not the silencer

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

As Al said there's nothing wrong with the can it's the clamp that joins headers to can that's broke.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

No it's not, it's the clamp that holds the headers to the header mount

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Why did that happen then?

_________________
08 Specialized Langster

Because he redrilled my mounting bracket to move the clamps closer together

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

There are two torca clamps that wrap round the joint between the header and the can to seal both that has broken. One needs replacing. Re-drilling the bracket closer shouldn't make it brake. All it did was straighten the clamp instead of pulling at an angle.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Do you really think that I just guessed at the design ?.......those hole centre are as they are for a very good reason

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

They were made for the race headers and race can not for any other replica types so how can they be suitable for all? It's been fitted for over a year now without problems they are just prone to break.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

_________________
08 Specialized Langster

The picture you posted above says it all.......that failure is due to you moving the hole centres.
Take a guess at how many of my brackets I've fitted to Albert headers and then take a guess at how many have failed

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

I'll see you in my office now lad ,six of the best for you