UK Buell Enthusiasts Group
http://www.ukbeg.com/forum/

Mod day!
http://www.ukbeg.com/forum/viewtopic.php?f=7&t=20542
Page 1 of 5

Author:  Ymale [ Sat Jul 18, 2015 9:31 pm ]
Post subject:  Mod day!

Today I fitted .....

New levers
Clear led tail light
New number plate
Oberon bar end mirrors
Longer bungs so the paddock stand doesn't damage the swing arm

Also removed mirrors and re wired the running lights as indicators with amber bulbs....looks sweet!.

Just waiting for fairings and mirror blanks to turn up.

Author:  Finmows [ Sat Jul 18, 2015 11:07 pm ]
Post subject:  Re: Mod day!

And there's the number to get on a "pig baiting" plate :twisted:

Author:  Jim [ Sun Jul 19, 2015 12:29 pm ]
Post subject:  Re: Mod day!

:yup:

Author:  Ymale [ Tue Jul 21, 2015 9:57 pm ]
Post subject:  Re: Mod day!

Pegasus mirror blanks arrived today ...

Author:  albert666 [ Tue Jul 21, 2015 10:34 pm ]
Post subject:  Re: Mod day!

:yup: I

Author:  Jim [ Wed Jul 22, 2015 10:07 pm ]
Post subject:  Re: Mod day!

:yup:

Author:  Ymale [ Wed Jul 29, 2015 9:11 pm ]
Post subject:  Re: Mod day!

Pretty much done!

Author:  Jim [ Fri Jul 31, 2015 9:46 pm ]
Post subject:  Re: Mod day!

:yup: :yup:

Author:  Ymale [ Thu Sep 03, 2015 9:39 pm ]
Post subject:  Re: Mod day!

Mod update

Bike should be back from the shop tomorrow less the alarm with new uprated stator and rotor modification courtesy of Paul at Demeanor Customs who does the EBR fix for £75 plus post. He used to do these mods for Black Bear so knows his stuff and has the jig set up. If you have an 09, don't live in fear of your stator going when you can save the cost of a new one for little money by doing this before your stator fails. You know you have to do it so call Paul on 07981 251711


More bits to go on thanks to Dave!

Ilmberger carbon exhaust shield
Ilmberger heel guards
Knight Industries foot pegs in black
New headlight unit and Halo kit to be installed
Front and rear RnG crash bobbins
Zero gravity black double bubble screen
EBR fairing as new (spare)
Decals....mmm not sure, bit blingy

Author:  Ymale [ Wed Sep 09, 2015 9:54 pm ]
Post subject:  Re: Mod day!

Pretty much everything above fitted today. Halo's need finishing ...clear sealant is only white because it's not gone off yet.

Author:  rik [ Wed Sep 09, 2015 10:08 pm ]
Post subject:  Re: Mod day!

Ymale wrote:
More bits to go on thanks to Dave!

Ilmberger carbon exhaust shield
Ilmberger heel guards
Knight Industries foot pegs in black
New headlight unit and Halo kit to be installed
Front and rear RnG crash bobbins
Zero gravity black double bubble screen
EBR fairing as new (spare)
Decals....mmm not sure, bit blingy

Like the rest of it isn't... lOl

Author:  Ymale [ Wed Sep 09, 2015 10:27 pm ]
Post subject:  Re: Mod day!

lOl fair comment ..

Author:  Ymale [ Thu Sep 10, 2015 8:42 pm ]
Post subject:  Re: Mod day!

Halo's done!

Author:  nosamp [ Thu Sep 10, 2015 9:12 pm ]
Post subject:  Re: Mod day!

8-)

Author:  ju [ Wed Sep 16, 2015 12:05 am ]
Post subject:  Re: Mod day!

Hope this avoids the 'sorry mate i didn't see you'

Page 1 of 5 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/