I'm looking for the flow rate of X1 injectors (part-# 29533-99Y, superseeded later by P0786.02A8) or a cross reference, if there is one available, to look it up here: http://www.witchhunter.com/injectordata1.php4

Anyone here who could help me?

Thanks,
Gunter

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett

Not that I have a number of spare injectors, I had a check and found some numbers; looks like they are Siemens 01f008a.

Tried your link and found no similarities so did a google and found these:

http://www.harley-davidson-forum.net/sh ... php?t=7813

http://xlforum.net/vbportal/forums/arch ... 68753.html

but this is probably what you need:

http://www.ebay.co.uk/itm/BUELL-XB9-REC ... 0051712295

_________________
08 Specialized Langster

Bingo! That part number rings a bell, so I'm quite sure I looked them up before

If these are 120 cc/min (< 11 lbs/hr), then it's much less than the flow rate from the later injectors. They deliver about 32 lbs/hr @ 50 PSI, which is very roughly 290 cc/min @ 300 kPa. This explains why I have to use much larger numbers in the fuel maps then.

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett