It is currently 19 Apr 2024 07:40

All times are UTC+01:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: need to know
PostPosted: 28 Jun 2009 10:14 
Hi just picked up Nov 07/57 ulysses xb12 xt with 7k on the clock love it but have no handbook/service book silly questions are there any fuel on/off taps, sevice intervals,when does belt need a change has just had 7000m service at riders,anything else i need/should know

thanks

Allan


Top
   
 Post subject: Re: need to know
PostPosted: 28 Jun 2009 10:21 
Offline
User avatar

Joined: 06 May 2009 13:55
Posts: 4500
Current ride: K100 CBR1000F z550Gt
Location: Joondalup
There's no fuel tap, it's fuel injected (I fell for that one as well :oooops:) The belt is supposed to last a "lifetime" (the debate continues on what that actually means :lol: )

_________________
Wear the fox hat


Top
 Post subject: Re: need to know
PostPosted: 28 Jun 2009 10:22 
Offline
User avatar

Joined: 06 May 2009 20:14
Posts: 73
Location: Ashford, Kent
no fuel tap,service interval 5000miles/every year (most on here do twice as often though) belt replacement just before it breaks ;) also always worth keeping an eye on all vehicles on a weekly basis just to keep tab on what has fallen off :!:

where are you in sussex? I am 20mins from rye if you want to meet up ..whichway?

_________________
........have you tried turning me off & then turning me on again ?


Top
 Post subject: Re: need to know
PostPosted: 28 Jun 2009 11:12 
Offline
User avatar

Joined: 11 May 2009 10:11
Posts: 8
Location: Melbourne (Aust)
The owners manuals are available online on the US website - not sure what you have to do to register.

This is the link to the '06 X model as an example - never needed to chase the info as I have the original manual.

http://www.buell.com/om/99477-06Y_en/index.asp#N1022

_________________
2009 XB12XT
2006 XB12X
2000 ZX12
1942WM20


Top
 Post subject: Re: need to know
PostPosted: 28 Jun 2009 16:23 
Offline
User avatar

Joined: 13 May 2009 22:42
Posts: 1865
Current ride: rusty 3-speed pedal
Location: Montauk
On the US Buell site, you will need to use the VIN to resister you as a Buell owner, then you have access to the manual. It's a pretty handy little manual, but there are some issues not covered in the service interval charts that most here on UKBEG seem to agree need sorting out. Wheel bearings come to mind, for example. Not much real mention in the manual of checking them, never mind replacing them.

_________________
2006 XB12Ss..... 1998 S1W..... 1996 S2T
We do not need the help of our friends so much as confidence that they will help us when we need it. –Epicurus


Top
 Post subject: Re: need to know
PostPosted: 28 Jun 2009 18:32 
Offline
The Nagged Hubby
User avatar

Joined: 06 May 2009 21:18
Posts: 1073
Consider getting a Free spirits belt tensioner, inspect the belt close whilst you have some warrenty.
An out put shaft oiler,
and consider undoing the spindles and retighten to the manual your self to be shore they have not over done them cos that will knacker them in no time.

Apart from that enjoy the grunt and handling, for that I sure do miss my xb!

Nate :D


Top
 Post subject: Re: need to know
PostPosted: 28 Jun 2009 21:36 
Offline
User avatar

Joined: 06 May 2009 21:29
Posts: 1479
Don't forget to claim your free replacement exhaust silencer, it will be f**ked and you've got warranty :yup:


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited