It is currently 29 Mar 2024 01:22

All times are UTC




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: ACF50
PostPosted: 26 Feb 2011 10:06 
Offline
User avatar

Joined: 23 May 2010 09:20
Posts: 168
Location: Northern Ireland (Newtownards)
OK folks I know this has been posted before. Been using ACF50 for the past 2-3 months.
No doubt about it this product does what it says on the tin. Definite reduction on the corrosion on my standard Uly can and the protection over the rest of the bike is amazing. Just remember a little goes a long way. I sprayed it on to a cloth for the plastics and a paint brush for engine and tricky to reach areas.
Once applied it lasts for ages. One application and I have ridden pretty much every day for the past 7 weeks or so. [url="http://wap.ebay.co.uk/Pages/ViewItemDesc.aspx?aid=380319488781&emvcc=0"]http://wap.ebay.co.uk/Pages/ViewItemDesc.aspx?aid=380319488781&emvcc=0[/url]


Top
   
 Post subject: Re: ACF50
PostPosted: 26 Feb 2011 10:48 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7253
Current ride: 1991 RS1200 westwind
I use it on the 1125 .............mainly on the exhaust can but also seperated all the exposed electrical connectors when new and sprayed all the contacts.
I spray the can and then use a rag to spread it all over ...smokes like fuck when you first warm here up though lOl

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
 Post subject: Re: ACF50
PostPosted: 26 Feb 2011 12:39 
Offline
User avatar

Joined: 05 May 2009 20:00
Posts: 10850
Current ride: X1 2001
Location: southampton
johnnyguk78 wrote:
OK folks I know this has been posted before. Been using ACF50 for the past 2-3 months.
No doubt about it this product does what it says on the tin. Definite reduction on the corrosion on my standard Uly can and the protection over the rest of the bike is amazing. Just remember a little goes a long way. I sprayed it on to a cloth for the plastics and a paint brush for engine and tricky to reach areas.
Once applied it lasts for ages. One application and I have ridden pretty much every day for the past 7 weeks or so. [url="http://wap.ebay.co.uk/Pages/ViewItemDesc.aspx?aid=380319488781&emvcc=0"]http://wap.ebay.co.uk/Pages/ViewItemDesc.aspx?aid=380319488781&emvcc=0[/url]



at £14 a tin i would use something else on your plastics mate :shock:

_________________
Feros Ferio


Top
 Post subject: Re: ACF50
PostPosted: 26 Feb 2011 12:45 
Offline
Needs more cowbell
User avatar

Joined: 03 Apr 2009 10:09
Posts: 8609
Current ride: None
Location: Southampton
No point using it on your plastics at all, just use it on exposed parts that corrode, if your feeling flush then a wipe of your casings too :)

_________________
"With square conduct, level steps, and upright intentions ..”


Top
 Post subject: Re: ACF50
PostPosted: 26 Feb 2011 12:47 
Offline
Nanny Brown
User avatar

Joined: 23 May 2009 22:22
Posts: 6175
Location: Portsmouth, UK
Ordered a can of the stuff only yesterday from this place....although it has gone up in price by 40p overnight.... :shock: :)

http://www.amazon.co.uk/ACF-50-13-oz-ae ... 643&sr=1-1

_________________
Valencia Orange XB12Scg - serviced by Maz 2018
Black P3 Blast - serviced by Maz and fixed by Maz in 2019


Top
 Post subject: Re: ACF50
PostPosted: 26 Feb 2011 13:03 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11771
Location: Oswestry
It keeps my rifles all sparkly in a damp cabinet too lOl

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: ACF50
PostPosted: 26 Feb 2011 13:10 
Offline

Joined: 23 Feb 2011 22:01
Posts: 486
Current ride: K1300
Amazing stuff, been using it for a few years now after a tip from an aircraft engineer,
Expensive yes, Worth it, definitely.

Spread it round is best as said, and I agree it's a waste of time to use it on plastics. Apparently BMW/Volvo are using it in factory now for electrical connectors.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited