It is currently 29 Mar 2024 15:15

All times are UTC




Post new topic  Reply to topic  [ 22 posts ]  Go to page 1 2 Next
Author Message
PostPosted: 07 Jul 2017 14:39 
Offline

Joined: 01 Jul 2017 19:31
Posts: 24
Current ride: 1125r
1125r or compatible aftermarket exhaust and connector pipe wanted please
cheers mitty


Top
PostPosted: 08 Jul 2017 08:47 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
mitty wrote:
1125r or compatible aftermarket exhaust and connector pipe wanted please
cheers mitty



Whats your budget Mitty?


Top
PostPosted: 08 Jul 2017 10:29 
Offline

Joined: 01 Jul 2017 19:31
Posts: 24
Current ride: 1125r
well i aint a rich man lol looked at the prices on ebay new ,and there frightening ,what you got and whats the price kiwi,is it plug and play or will i have to have the fuelling re-mapped to suit


Top
PostPosted: 08 Jul 2017 11:02 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
mitty wrote:
well i aint a rich man lol looked at the prices on ebay new ,and there frightening ,what you got and whats the price kiwi,is it plug and play or will i have to have the fuelling re-mapped to suit


Mine come with an HMF and I am very happy with it. I've seen kits for around the £400 mark with K&N filter if you don't already have. They have a new blackout one too which looks mean https://www.hmfracing.com/exhausts/buel ... omize=true

You need the HMF map I believe, mine came already sorted so you'll need to speak to them.

No good if you want to track it though as its 110dB at 5k.

So, from me if you have 4 or 500 speak to HMF.

Or, Ymale on here had a standard one with some internal work done for less than half that. I was thinking about that so I could try a trackday but I bought a track hack instead. viewtopic.php?f=10&t=22158&p=294572&hilit=1125#p294572

But... If you have upwards of the £500 mark, speak to Maz about the setup on his 1125. If I was to replace mine it would be this one. http://www.aph-performance-engineering.com/


Don't go Jardine, I've heard bad reports and they're pretty ugly IMO

Good luck.


Top
PostPosted: 08 Jul 2017 11:49 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
http://www.aph-performance-engineering. ... d=3024354&


Top
PostPosted: 08 Jul 2017 12:09 
Offline

Joined: 01 Jul 2017 19:31
Posts: 24
Current ride: 1125r
that looks ok ,what we talking price wise kiwi


Top
PostPosted: 08 Jul 2017 12:11 
Offline

Joined: 01 Jul 2017 19:31
Posts: 24
Current ride: 1125r
think ive read this wrong mate ,thought it was a second hand one for sale ,sorry im a bit thick


Top
PostPosted: 08 Jul 2017 12:21 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
I do ramble a bit but in a nutshell:

Cheap: viewtopic.php?f=10&t=22158&p=294572&hilit=1125#p29457



Mid range: http://www.ebay.co.uk/itm/HMF-Performan ... SwyltZPwcr



Top dollar but best stainless system you'll find for your steed: http://www.aph-performance-engineering. ... d=4518725&

Hope that helps.

If in doubt ask :maz: is the moto here.


Top
PostPosted: 08 Jul 2017 12:27 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
I'm not selling Mitty, Ymale is PM him.

But if you can scratch up a larger sum spend it...you won't regret it. Can, air filter and map is important on these bikes if you've not already picked up on that :)


Top
PostPosted: 09 Jul 2017 00:54 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
Kiwi wrote:
I do ramble a bit but in a nutshell:

Cheap: http://www.ukbeg.com/forum/viewtopic.ph ... 125#p29457



Mid range: http://www.ebay.co.uk/itm/HMF-Performan ... SwyltZPwcr



Top dollar but best stainless system you'll find for your steed: http://www.aph-performance-engineering. ... d=4518725&

Hope that helps.

If in doubt ask :maz: is the moto here.


I'm not sure why you're referring to the APH one as 'top dollar' compared to the 'mid range' HMF one, as it's cheaper than the HMF!

I have that APH one on my 1125CR; it is incredibly loud, but I had a baffle made and it reduced it by about 3 or 4 decibels, changing it from unbearable, to bearable (and I like loud bikes!) It also got rid of a bit of a flat spot I had at 4000rpm and made it smoother at low revs (maybe more torque at low rpm). I definitely recommend it :yup:

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
PostPosted: 09 Jul 2017 10:25 
Offline

Joined: 01 Jul 2017 19:31
Posts: 24
Current ride: 1125r
Kiwi wrote:
I'm not selling Mitty, Ymale is PM him.

But if you can scratch up a larger sum spend it...you won't regret it. Can, air filter and map is important on these bikes if you've not already picked up on that :)


new here kiwi is ymale a member? here


Top
PostPosted: 09 Jul 2017 20:28 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
FerrisBueller wrote:
Kiwi wrote:
I do ramble a bit but in a nutshell:

Cheap: viewtopic.php?f=10&t=22158&p=294572&hilit=1125#p29457



Mid range: http://www.ebay.co.uk/itm/HMF-Performan ... SwyltZPwcr



Top dollar but best stainless system you'll find for your steed: http://www.aph-performance-engineering. ... d=4518725&

Hope that helps.

If in doubt ask :maz: is the moto here.


I'm not sure why you're referring to the APH one as 'top dollar' compared to the 'mid range' HMF one, as it's cheaper than the HMF!

I have that APH one on my 1125CR; it is incredibly loud, but I had a baffle made and it reduced it by about 3 or 4 decibels, changing it from unbearable, to bearable (and I like loud bikes!) It also got rid of a bit of a flat spot I had at 4000rpm and made it smoother at low revs (maybe more torque at low rpm). I definitely recommend it :yup:



Did you click on the link Ferris??


Top
PostPosted: 09 Jul 2017 20:32 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
mitty wrote:
Kiwi wrote:
I'm not selling Mitty, Ymale is PM him.

But if you can scratch up a larger sum spend it...you won't regret it. Can, air filter and map is important on these bikes if you've not already picked up on that :)


new here kiwi is ymale a member? here


He sure is Mitty. At the bottom of his post there is a PM button, click that and you will be able to message him :)


Top
PostPosted: 09 Jul 2017 20:33 
Offline
User avatar

Joined: 06 Oct 2013 20:57
Posts: 374
Current ride: 1125CR & HD Hardtail
Location: London.
Kiwi wrote:
FerrisBueller wrote:
Kiwi wrote:
I do ramble a bit but in a nutshell:
Cheap: http://www.ukbeg.com/forum/viewtopic.ph ... 125#p29457

Mid range: http://www.ebay.co.uk/itm/HMF-Performan ... SwyltZPwcr

Top dollar but best stainless system you'll find for your steed: http://www.aph-performance-engineering. ... d=4518725&

Hope that helps.

If in doubt ask :maz: is the moto here.


I'm not sure why you're referring to the APH one as 'top dollar' compared to the 'mid range' HMF one, as it's cheaper than the HMF!

I have that APH one on my 1125CR; it is incredibly loud, but I had a baffle made and it reduced it by about 3 or 4 decibels, changing it from unbearable, to bearable (and I like loud bikes!) It also got rid of a bit of a flat spot I had at 4000rpm and made it smoother at low revs (maybe more torque at low rpm). I definitely recommend it :yup:



Did you click on the link Ferris??


Yep, but I can see now its taking me to a different one from yesterday. Yesterday it was the £375 one.

_________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.


Top
PostPosted: 09 Jul 2017 20:47 
Offline
User avatar

Joined: 11 Mar 2016 18:28
Posts: 998
Current ride: 1125r XB12X
Location: South
Quote:
Yep, but I can see now its taking me to a different one from yesterday. Yesterday it was the £375 one.


Well I haven't changed it... You must've clicked the link further up the thread for the slip on, which is nice also, but if I had a money tree in my yard I'd get that one in the link after 'top dollar' But not being able to mount it or map it myself I would guess there would be no change out of a £1000 for me :( Whereas my humble HMF would've been less than half that.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 22 posts ]  Go to page 1 2 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited