Last visit was: Mon Nov 19, 2018 9:34 am It is currently Mon Nov 19, 2018 9:34 am

All times are UTC+01:00




 [ 15 posts ] 
Author Message
 Post subject: 8mm holes
PostPosted: Wed Apr 27, 2016 3:21 pm 
Offline
User avatar

Joined: Wed May 06, 2009 7:22 pm
Posts: 474
Current ride: 2000 M2
Location: bournemouth
Wanted 20 x 8mm holes so I can make some washers, will swap for 6mm as bought in error.
Thank you

_________________
Do you want it right or right now ?


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Wed Apr 27, 2016 4:22 pm 
Offline
User avatar

Joined: Wed Apr 29, 2009 7:27 pm
Posts: 663
tubbs wrote:
Wanted 20 x 8mm holes so I can make some washers, will swap for 6mm as bought in error.
Thank you

Sorry, can't help. Only have 5/16" available.

_________________
Try this on yer fueller...........


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Wed Apr 27, 2016 7:08 pm 
Offline
User avatar

Joined: Wed May 06, 2009 5:28 pm
Posts: 7257
Current ride: Muffin 2001 X1
The only ones I have have got chamfered edges , will they beany good to you ? ;-)

_________________
2001 X1 2009 1125CR 2006 Uly oh and some Chinese/German hybrid


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Wed Apr 27, 2016 7:41 pm 
Offline
User avatar

Joined: Tue Aug 05, 2014 5:46 pm
Posts: 217
Current ride: ashen
Location: location location
:run:

_________________
What could possibly go wrong... :headbang:


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Wed Apr 27, 2016 10:06 pm 
Offline
User avatar

Joined: Wed May 06, 2009 9:29 pm
Posts: 1369
I have 30000 in stock but sadly have no use for your 6mm holes Tubbs, what else have you got?

Andy


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Thu Apr 28, 2016 5:55 pm 
Offline
User avatar

Joined: Wed May 06, 2009 7:22 pm
Posts: 474
Current ride: 2000 M2
Location: bournemouth
spondon440 wrote:
I have 30000 in stock but sadly have no use for your 6mm holes Tubbs, what else have you got?

Andy

I have a Interrositer spring to fit a Triumph Tina scooter 3 inch long with 1 inch cut off one end?
Or a box of used rivets
Will do a deal but only want 20 holes please

_________________
Do you want it right or right now ?


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Thu Apr 28, 2016 7:40 pm 
Offline
User avatar

Joined: Tue May 05, 2009 8:00 pm
Posts: 9009
Current ride: X1 2001 White Riot
Location: southampton
i had some holes, i tried to post to you, but they keep falling through the envelope

_________________
Obey the principles without being bound by them.
Bruce Lee


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Thu Apr 28, 2016 9:46 pm 
Offline
User avatar

Joined: Wed May 06, 2009 9:29 pm
Posts: 1369
tubbs wrote:
spondon440 wrote:
I have 30000 in stock but sadly have no use for your 6mm holes Tubbs, what else have you got?

Andy

I have a Interrositer spring to fit a Triumph Tina scooter 3 inch long with 1 inch cut off one end?
Or a box of used rivets
Will do a deal but only want 20 holes please


I'd love the spring but I don't want to split my collection of holes up, I think I'll have to regret.
Andy


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Thu Apr 28, 2016 9:48 pm 
Offline
User avatar

Joined: Tue Aug 05, 2014 5:46 pm
Posts: 217
Current ride: ashen
Location: location location
flux capacitor with live mapping for constant edge following...trade you for the inch cut off? :yup:

_________________
What could possibly go wrong... :headbang:


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Thu Apr 28, 2016 11:08 pm 
Offline
User avatar

Joined: Wed Apr 29, 2009 7:27 pm
Posts: 663
Nutah wrote:
i had some holes, i tried to post to you, but they keep falling through the envelope

Have to send them as an email attachment then.

_________________
Try this on yer fueller...........


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Fri Apr 29, 2016 10:52 am 
Offline
User avatar

Joined: Tue May 05, 2009 8:00 pm
Posts: 9009
Current ride: X1 2001 White Riot
Location: southampton
03 wrote:
Nutah wrote:
i had some holes, i tried to post to you, but they keep falling through the envelope

Have to send them as an email attachment then.


a good idea I would love to, but unfortunately i cant operate a computer & don't have one

_________________
Obey the principles without being bound by them.
Bruce Lee


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Fri Apr 29, 2016 11:40 am 
Offline
User avatar

Joined: Wed Apr 29, 2009 7:27 pm
Posts: 663
Nutah wrote:
03 wrote:
Nutah wrote:
i had some holes, i tried to post to you, but they keep falling through the envelope

Have to send them as an email attachment then.


a good idea I would love to, but unfortunately i cant operate a computer & don't have one

That's OK, just pop the holes through a fax machine and fax them over.

_________________
Try this on yer fueller...........


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Fri Apr 29, 2016 4:02 pm 
Offline
User avatar

Joined: Tue May 05, 2009 8:00 pm
Posts: 9009
Current ride: X1 2001 White Riot
Location: southampton
i have attached them to a carrier pigeon's leg
his name is speckled Jim although i have a bad feeling....

https://www.youtube.com/watch?v=1BxFlmb6S6E :old:

_________________
Obey the principles without being bound by them.
Bruce Lee


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Fri Apr 29, 2016 7:30 pm 
Offline
User avatar

Joined: Wed May 06, 2009 7:22 pm
Posts: 474
Current ride: 2000 M2
Location: bournemouth
nickyb wrote:
flux capacitor with live mapping for constant edge following...trade you for the inch cut off? :yup:

Is MAP an a to z ???

_________________
Do you want it right or right now ?


Top
   
 
 Post subject: Re: 8mm holes
PostPosted: Sun May 01, 2016 7:22 pm 
Offline
User avatar

Joined: Tue Aug 05, 2014 5:46 pm
Posts: 217
Current ride: ashen
Location: location location
it is...but the middle pages have been removed to hide a black hole!

_________________
What could possibly go wrong... :headbang:


Top
   
 
 [ 15 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: CommonCrawl [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited