UK Buell Enthusiasts Group
http://www.ukbeg.com/forum/

Your Kidding
http://www.ukbeg.com/forum/viewtopic.php?f=10&t=22830
Page 1 of 1

Author:  gusm2 [ Thu Dec 07, 2017 10:35 pm ]
Post subject:  Your Kidding

https://www.ebay.co.uk/itm/Buell-X1-S1- ... SwFzRZ43Bl

:shock: :shock:

Bassy-was-here :shut:

Author:  Maz [ Thu Dec 07, 2017 11:35 pm ]
Post subject:  Re: Your Kidding

:headbang: ......it's not even a pro series :x

Author:  conquistador [ Fri Dec 08, 2017 10:15 am ]
Post subject:  Re: Your Kidding

I'm sure I bought something from him years ago, the name rings a bell. It didn't cost that much though :shock:

Author:  whitey [ Fri Dec 08, 2017 1:53 pm ]
Post subject:  Re: Your Kidding

He purchased my S1 which Kev now has, was a good guy, but times can change peoples maybe :?:

Author:  DaveH [ Fri Dec 08, 2017 3:14 pm ]
Post subject:  Re: Your Kidding

Well is it an X1 or a S1 set of headers. They are two different sets of pipework :idea:

Author:  gusm2 [ Fri Dec 08, 2017 3:36 pm ]
Post subject:  Re: Your Kidding

He must be on here its down to £600 quid now, and mentions about not being 'genuine pro series headers :?:
And most of us don't know what we're talking about :roll:

Author:  Pan [ Fri Dec 08, 2017 10:20 pm ]
Post subject:  Re: Your Kidding

At the risk of looking like a complete dick can anybody explain or even better show the difference's between these and pro series pipes and also why some pipes are 2" and some 2.5" ?

Mark

Author:  TOPGUMM [ Fri Dec 08, 2017 11:25 pm ]
Post subject:  Re: Your Kidding

I`d like one of those"New 2.5" 90 degree Elbow to Allow Fitting a Pro-Series Muffler to all US 2.5" Headers."
Sold Bassywashere an S1 bit and bought from him, okay to deal with.

Author:  pash [ Fri Dec 08, 2017 11:34 pm ]
Post subject:  Re: Your Kidding

Pan wrote:
At the risk of looking like a complete dick can anybody explain or even better show the difference's between these and pro series pipes and also why some pipes are 2" and some 2.5" ?

Mark


The Pro Series pipes had longer headers between exhaust port and collector. The Pro Series pipes had the collector exit facing backwards.

The standard exhaust has the collector exit facing to the side.

On the standard exhausts, the US models had a 2.5" collector exit whereas we has a 2" collector exit.

The Pro Series headers had a 2.5" collector exit.

Author:  Pan [ Sat Dec 09, 2017 12:00 am ]
Post subject:  Re: Your Kidding

pash wrote:
Pan wrote:
At the risk of looking like a complete dick can anybody explain or even better show the difference's between these and pro series pipes and also why some pipes are 2" and some 2.5" ?

Mark


The Pro Series pipes had longer headers between exhaust port and collector. The Pro Series pipes had the collector exit facing backwards.

The standard exhaust has the collector exit facing to the side.

On the standard exhausts, the US models had a 2.5" collector exit whereas we has a 2" collector exit.

The Pro Series headers had a 2.5" collector exit.


Gotcha! Cheers Nick

Author:  mev [ Wed Dec 13, 2017 4:15 pm ]
Post subject:  Re: Your Kidding

If anyone is interested I have a Vance and Hines silencer for an S1 with the 2 1/2" collector end, going for a freeby as I can't be arsed to mail it but if anyone wants to collect it and maybe make a donation to the site then you would be welcome. The silencer could do with a bit of a polish but other than that it is in good nick and sounds a little cheeky.

Author:  mev [ Wed Dec 13, 2017 4:24 pm ]
Post subject:  Re: Your Kidding

Forgot to mention the collector end faces sideways (before Nick points out my omission, bloody know alls :D )

Author:  TOPGUMM [ Wed Dec 13, 2017 6:11 pm ]
Post subject:  Re: Your Kidding

If there`s a chance of someone getting it and posting it on I`d like it to go with a US set of headers.
Or if you could wrap it up and I`ll get a courier to pick it up from you.

Author:  pash [ Wed Dec 13, 2017 6:22 pm ]
Post subject:  Re: Your Kidding

:cry:

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/